BN-LINK Wireless Remote Control Electrical Outlet Switch for Lights, Fans, Christmas Lights, Small Appliance, Long Range White (Learning Code, 5Rx-2Tx) 1200W/10A

Update: remote suddenly “failing” (it’s not the remote)
UPDATE: many people experience the remote suddenly failing to work. My remote finally started showing this behavior a year after my purchase. But I do know what is happening: This happens in the winter or perhaps in a well air conditioned home. The battery gets cold, the juice solidifies and the remote fails to catch a signal. There are three remedies: 1). Hold the remote on a warm part of your body (I tuck it under the back of my knee and tuck in my leg), 2) Take a blow dryer to the remote or 3) Remove the battery and roll it swiftly between your palms to heat it up. This takes about 30 seconds, as does the blow dryer. The first suggestion takes longer. This occurs with many models and it is not the remote that is broke, it is the battery that is too cold. Interesting point: look at the reviews that complain about the remote stopping suddenly, and check out the date of their review. 🙂 They are all in cold months. Other than frigid batteries, this is a very reliable device. Enjoy!OLDER REVIEW:I had a trio of remote outlets I bought back about five years ago for the Christmas tree. They finally gave out on me, but it might be battery related. Either way, I bought new batteries and also bought new remote plugs; this one has five.The buttons on the remote controls are labeled and the plugs (1-3, anyway) work well. The only issue I have is the older plugs I had allowed me to plug my lamps in the side. These only offer a receptacle on the front, making the plug jet out, making it difficult to tuck the cords away.It has a good range. I went clear over to the front of my house to turn on the lamp in the back room, and it easily turned on the lamp through the walls and any other crud I have, taking up space and blocking the plug.This means when I do get my tree up, I can turn the tree lights on and off from my seat.It comes with two remotes. The plugs come with a button on the side to activate the plug. You plug one plug in each device, and both remotes immediately work. No need to sync or pair the remote with the outlet the way you would with Bluetooth.Of course, with two remotes, someone else can have control of your devices. If you’re a control freak, good luck with that! But I like to think of it as having an extra remote to replace one that will no doubt get lost some day.The only way I could handle the previously lost remote issue with the set that only came with one remote, was to turn the lights on and off manually. When I had the lights on, I shifted in my seat and the light suddenly turned off. I found the remote beside my recliner cushion. Then I added a key ring to it and hung it on my metal desk lamp that’s holding all sorts of magnetic gizmos. And in mentioning that, I should add that I glued a small powerful magnet to one of the remotes of these outlets and it easily sticks to the metal lamp, replacing the previous remote.I do like these remote controlled outlets, even with the front-facing receptacles, which is nothing more than a mild nuisance.I am considering buying another set, but I do want to try to get my older set working first.No sense in wasting something that could be repaired.I do recommend these. If I have any issues with this set, I will be certain to update my review. But I will also update to mention any feature I discover that suddenly impresses me.

Easy to setup
Two remotes and five plugs both have well marked numbers. Just plugged the five around our bedroom, for dresser lights, tv firestick, his/hers heating pads, cell phone charger. Then put a remote at each bedside. All worked immediately with just push of button; no set up and no rolling out of bed to turn things off or on!

Remote wireless light switch
What I really love about this design is for its brightness specially the control capability if my kids leave one of the lights on in the hall I can simply turn it off from another button. I have one by the kitchen, so I don’t have to go all the way upstairs to turn it off . Its size makes it easier to install because I simply used a resistible double side tape hanging in the wall attached to the control as seen in the second picture. Great quality!

Efectivamente se activa lo conectado aún cuando el controlito esté en otra habitación. Muy útil para prender y apagar los equipos conectados, desde el lugar en que se encuentre la persona, sin tener que desplazarse o pararse de su lugar.

I have three living room lamps in locations hard to reach in order to turn on and off. Problem solved in five minutes. Plus added a fourth lamp for convenience.

No issues, easy to install easy to use